Injection Molding Services
Craftech is a full-service injection molder providing mold design and tool making, injection molding, secondary operations and quality assurance to our customers.
With over three decades of manufacturing experience, Craftech’s molding division has “hands-on” knowledge of virtually all types of engineered thermoplastic resins and we work with custom compounds and alloys to meet unique applications.
After your precision and in tolerance mold is produced by our engineering department and skilled tool makers, production of your parts begin.
Craftech’s molding presses range from 40 to 300 ton capacity and part weight ranges run from 1 gram and up. Standard and custom plastic products are manufactured using conventional insert and encapsulation molding on vertical shuttle and horizontal molding machines.
Craftech’s extensive molding experience and secondary operations which include ultrasonic welding and insertion, annealing and assembly make us your one-stop source for precision plastic components and molds.
What is an Injection Mold?
An injection mold is a tool that when all the parts are assembled fits into an injection molding machine to manufacture identical plastic parts. Injection molds start with a drawing of the part required for the required application. Then an engineer with knowledge of the injection mold-making process creates a drawing of all the parts of the mold.
Making an injection mold takes a great deal of skill and some very expensive machinery. They are generally made out of tool steel by CNC machines. They are the negatives of the actual part required. There is also a runner system that allows the hot plastic to fill all the mold cavities in addition to channels that help cool or heat the mold thus controlling its temperature. About 10% of a typical injection molding cycle is dedicated to actually injecting the molten plastic. The remaining percentage is dedicated to cooling and solidification, packing, and holding.
The simplest injection mold is a straight-pull injection mold consisting of two halves. The “A” side and the “B” side. The front side or A side faces the cavity and is referred to as the cavity. The B side faces the cavity and is known as the core mold. However, not all injection molds follow this simple pattern.
Parts of an Injection Mold
The engineer designing the mold will decide if it requires an insert tool or a free-standing mold.
To make a free-standing injection mold manufacturers buy pre-made mold bases from one of several worldwide companies such as Misumi, DME or Hasco.
An injection mold will include cooling lines, a runner system, a sprue, cavities, and gates. Injection molds also have threaded holes for eye bolts that are used in mounting the mold in a molding machine. Additionally, they have guide pins for lining the mold up on a workbench so that alignment of the A and B sides is not necessary once the mold is in the machine.
Ejecting a Part
Once a part solidifies, it is ejected from the mold with an ejection pin, pins, and sleeves or using any one of the other methods including ejector plates, air ejection, and more.
EDM (Electronic Discharge Machine)
But some parts have a cavity that cannot be readily milled. In this case, an electrode made out of graphite or copper tungsten is turned on a CNC machine and then placed in the bath of an EDM (electronic discharge machine.) The EDM will erode the steel to form a cavity exactly the shape of the electrode. There are two types of EDM: sinker and wire. A sinker EDM is designed to make a cavity while the wire EDM uses a fine brass wire to cut simple or compound shapes.
The Runner System
The runner system allows the liquid plastic to flow into the cavities. There are three main sections to the runner system of an injection mold: the sprue, the runner, and the gate.
A sprue is hooked up to the nozzle of the molding machine barrel. The molten plastic is delivered by the reciprocating screw to the nozzle and thus through the sprue. Then the material flows into the runners. Finally, the molten plastic will fill each cavity through the gate. Gas may be released through a vent.
Injection Molding Machine
An injection molding machine is made up of a loader, a reciprocating screw, the barrel, the nozzle, and a platen. During this process, polymer granules are first put into a dryer to remove moisture. Then the granules are moved into the barrel where they are heated to the melting point of the plastic being used. A large reciprocating screw runs through the barrel and moves the plastic along until it reaches the nozzle. It is injected through the nozzle into the mold which is installed on the platen. After the plastic cools, the mold opens, and the plastic parts are knocked out by ejector pins. The cycle is usually repeated every 18-90 seconds.
CUSTOMER SERVICE TEAM
We provide our customers with reliable and consistent service that eliminates the headaches of supply chain disruptions. Learn more about us.